A Productive Rant About Repairs To Upvc Windows
Repairs to uPVC WindowsuPVC windows are a great choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they don't get rusty or decay.
It is important to clean and oil UPVC windows and doors on a regular basis. This will save you from unnecessary repair costs and improve energy efficiency.
1. Broken Glass
If the glass in your window is damaged, it can cause a huge amount of damage to your home, which can make it very hazardous and possibly fatal. It is essential to take the time to ensure that you are doing everything you can to keep your windows in good shape.
For single pane windows it can be relatively simple to replace windows, and the new one is usually able to fit into the frame of the previous one easily. If windows with double panes are joined by internal beading, it will be difficult to remove and replace the old panes. In this instance, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.
If you are going to try to remove the window panes yourself, it is essential to wear the proper safety gear, including thick gloves and eye protection. It is also recommended to lay down a dropcloth prior to you begin working on the window panes, so that any shards fall on the fabric and not onto the floor which could cause them to be trampled under.
It's a good idea to cover the gap with tape after the glass is removed. This will stop drafts and water from entering your home until a professional is able to fix the window. It also acts as a barrier, deterring any intruders from getting access to your home. If the distance between the door and the window is substantial, you may want to use security screens that includes windows. This will give you the best of both.
2. Sagging
uPVC windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows with sash. In time, they could develop a variety of issues, including sliding. A sagging window in uPVC can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it's crucial to act fast to stop the issue from worsening.
Repositioning the hinges can help fix a window that is sliding. You'll first need to open the windows to reach the frame. Then, you can remove the top and bottom hinges with a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after you've repositioned your hinges. If you're satisfied with the fit, you can tighten the screws to ensure they remain in position.
If you aren't able to move the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and become dry which causes their tightness to decrease. It is important to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.
uPVC handles can also loosen up. The majority of the time, this is caused by screws that have become loose over time. However, it can occur because the handle mechanism has worn out. It's relatively simple to fix a loose uPVC hand. First, you'll need close the window and perform a test fit. The corners of the sash need to align with the casing joint. If it doesn't, you can use a screwdriver or a wrench to loosen the handle, and then reverse the mechanism back into the position it was in.
3. Water Leaks
It is essential to take action if get up each morning to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home, and impact your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.
This is an easy fix that can be done by any DIYer who has the ability. Depending on the severity of the problem the caulking used previously might need to be removed before a new layer can be put on. It is crucial to keep in mind that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk in order to make the area harder to clean and could reduce the efficiency of your energy.
It is crucial to make upvc window repair sure that the drainage holes are clear of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more severe cases, you may need to replace the window.
Mold spots and rotten sills are another sign of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the home.
If the leakage occurs between the double-glazed window, it is more likely that the problem is with the seal than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.
4. Faulty Hinges
If your uPVC windows are difficult to open, or are loose and blow open in a breeze it could be hinges at fault. Any competent DIYer can replace the hinges in a matter of minutes.
Like all mechanical parts hinges are prone to be damaged over time. It is very easy to change the hinges on a window, but it's simpler if you have someone to help you hold the frame.
It is also worth checking that the uPVC hinges are opened and closed in the right direction. This can be done by looking for the arrow on each hinge. This shows which way the window should open.
The issue can be caused either here by opening the window improperly or due to a poor installation at the factory. Sending us a photo via our website is often enough to resolve the problem. We are always happy to give suggestions.
It is also important to grease the hinges on a regular basis. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to open and close more easily. It also decreases the chance of windows sticking and help prevent corrosion. This is recommended to be done at least every year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.
5. Draughts
Draughts in Upvc windows can be caused by various factors. First, the hinges due to wear and tear may become displaced, which will cause a gap to form between the sash and the frame. This can be easily fixed by giving them a good cleaning, but if they are beyond repair it could be necessary to have them aligned or replaced. Second, the interlock can be unbalanced. This is located on the hinge's side, and could require read more to be cleaned. In certain instances it is possible to replace these.
The next most common cause of draughts is the window seals. They can become worn down or damaged over time, and allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the repairmywindowsanddoors.co.uk windows made of upvc with low-emissivity glass. This will help regulate indoor temperatures and lessen the possibility of draughts.
The final method to cut down on draughts effectively is by using a draught-excluder. These are usually made of fabric tubes filled with a filler which can be placed over your window sill. They can help stop cold air from entering and keep your home warm and cosy!
Your windows made of upvc will continue to provide excellent insulation and security to your home by performing regular maintenance and repairs. It is crucial to recognise that all windows have a lifespan and they may reach an point at which it is more economical to replace them than repair them. If you have any problems with your window made of upvc website it is recommended to speak with a professional as soon as you can.